Methanol steam reforming (MSR) is deemed to be an effective way for hydrogen production and Pd/ZnO catalyst were found to exhibit high activity in this reaction. However, their activities are strongly related to the preparations methods. In most cases, these catalysts are synthesized by impregnation or co-precipitation methods, aiming to change the dispersion and stability of Pd nanoparticle to get better performance. Here we report an efficient Pd/ZnO catalyst that was synthesized with zeolitic imidazolate framework-8 (ZIF-8) as the precursor, on which Pd ions was supported after NaHB4 reduction. Typically, when the catalyst reduced at 300 degrees C for 2 h, the methanol conversion could reach 97-98% and the CO2 selectivity is around 86.3% under the reaction condition of 0.1 MPa, water/CH3OH = 1.2:1 (mol ratio), WHSVmethanol = 43152ml/g(cat)*h, catalyst = 0.1 g, our catalyst was found to show much better performance than other Pd@ZnO catalysts prepared by other methods, especially in terms of selectivity which is particularly important for hydrogen fuel cell application considering that Pt electrode could be poisoned by even trace amount of CO. It turned out that the large surface area, enough holes, evenly distributed PdZn alloy activity sites and abundant oxygen vacancies lead to the overall excellent performance of our catalyst. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.