The breakup process of a single drop in homogeneous isotropic turbulence was studied using direct numerical simulations. A diffuse interface free energy lattice Boltzmann method was applied. The detailed visualization of the breakup process confirmed breakup mechanisms previously outlined such as initial, independent, and cascade breakups. High-resolution simulations allowed to visualize another drop breakup mechanism, burst breakup, which occurs when the mother drop has a large volume, and the flow is highly turbulent. The simulations indicate that the type of the breakup mechanism is a strong function of mother drop size and energy input. Large mother drops in highly turbulent flow fields are more likely to burst, producing a large number of drops of the size close to the Kolmogorov length scale. Small drops in moderate turbulence tend to break only once (initial breakup). The interfacial energy of a drop was tracked as a function of time during drop deformation and breakage. The maximum energy level of the deformed mother drop was compared to commonly used estimates of critical energy necessary to break a drop. Our results show that these reference levels of critical energy are usually underestimated. Moreover, in some cases even if the critical energy level was exceeded, the drop did not break because the time of the interaction between the drop and the eddies was not enough to finish the breakup. The numerical insight presented here can be used as a guideline for the selection of assumptions and simplifications behind breakup kernels.