The exploitation of renewable energy sources and the use of primary energy saving techniques have been recognized as key solutions to face climate changes. The consequent energy policies are pushing the transition from a centralized power generation system to a distributed polygeneration system able to meet simultaneous heating, cooling and electricity demand. However, small scale polygeneration plants do not ensure any primary energy and cost saving without a proper sizing and operation of the plant. Furthermore, a flexible configuration of the waste heat recovery system (WHRS) adopted for poly generation purposes can be equally important. Therefore, starting from the experimental data concerning a 15 kW micro-CHP plant previously designed and prototyped, the paper addresses the performance assessment of a CHCP plant configuration based on the same basic engine-electric generator system through the 1D thermo-fluid dynamic characterization of an alternative double water circuit WHRS. This configuration, delivering thermal power at different temperature level, could be useful to meet thermal and cooling demand from different user or when seasonal energy demand occurs. This paper also provides an effective approach for the design of WHRS which are capable to ensure a reasonable matching between the temperature level required by the user and that provided by the plant. In this way, being the energy saving dependent on the thermal power recovered and actually exploited, and so on the temperature level which characterizes the user's heat demand, primary energy savings are more easily achievable even when small scale polygeneration applications are considered. Results shows the possibility of supplying an absorption chiller and obtaining a coolling capacity of about 10.5 kW from the resulting CHCP plant configuration. (C) 2019 Published by Elsevier Ltd.