Currently, precious metal catalysts or toxic copper-chromium catalysts are widely used in the catalytic hydrogenation of furfural. In this study, the selective hydrogenation of furfural to furfuryl alcohol was performed over alumina-carbon matrix embedded Ni nanoparticles catalyst. The Ni-loaded metal organic framework precursors were synthesized by reverse microemulsion method (water in oil), then the Ni/Al2O3-C catalysts were obtained by pyrolysis under a nitrogen atmosphere. Various characterizations including XRD, XPS, SEM, TEM, TPR, TPD and TG were carried out to reveal the microstructure and chemical composition of the prepared samples. The results showed that the hexagonal platelet structure and the smaller nickel nanoparticle size(similar to 8nm) benefits from the alumina-carbon matrix support, which helped the uniform dispersion and prevented it from accumulation at high temperatures. In addition, the catalyst performance was greatly affected by the calcination conditions and metal loading. At optimized operating conditions, 98.7% conversion of furfural and 92% yield of furfuryl alcohol could be achieved over Ni-0.15/Al2O3-C catalyst in the liquid phase hydrogenation reaction with a good reusability. [GRAPHCIS].