This study provides a novel value-added utilization of the agroindustrial waste of royal palm tree leaf sheath to produce cellulose acetate. One of the motivations of this work was the fact that Brazil is one of the largest heart of palm producers in the world. However, as a result of extraction and processing, tons of waste are generated and discharged to the environment. Such waste is rich in lignocellulosic material, which could be reused to obtain derivatives of interest and commercial value. The synthesis of cellulose acetate was performed through a homogeneous acetylation reaction. Three different conditions were tested for delignification of the raw material, which resulted in a reduction in lignin content from 17.75 to 7.72%. The highest yield of cellulose acetate reached 99.5%, with degree of substitutions ranging between 2.08 and 2.82, which indicates satisfactory conversion. The Fourier transform infrared spectrum showed that practically all hydroxyl groups were replaced by acetate groups; this was also confirmed by nuclear magnetic resonance analysis. X-ray diffraction analysis showed that the cellulose acetate crystallinity index was 8.9%. This demonstrates the viable potential of cellulose acetate production with low cost and use of highly available agroindustrial waste. POLYM. ENG. SCI., 59:891-898, 2019. (c) 2018 Society of Plastics Engineers