Petroleum Chemistry, Vol.58, No.12, 1045-1050, 2018
Kinetic Features of Light Cycle Oil Hydrodesulfurization Reactions in the Presence of a Co-6-PMO12(S)/Al2O3 Catalyst
The group kinetics of reactions of organic sulfur compounds present in light cycle oil (LCO) in the hydrotreating process over a Co-6-PMo12(S)/Al2O3 sulfide catalyst based on phosphomolybdic heteropoly acid as a function of hydrogen pressure (4, 5, and 6 MPa) at varying temperature (300-360 degrees C in 20 degrees C increments) and space velocities of 0.5, 1.0, and 3.0 h(-1) has been studied. Total sulfur content in the feedstock and the hydrogenation products has been determined. The obtained data on the kinetics of hydrodesulfurization (HDS) reactions can be used to select optimum modes of the LCO hydrotreating process. Using the coefficient of determination and Fisher's ratio test values, the adequacy of the pseudo-first-order and 1.5-order kinetic models and the Langmuir-Hinshelwood model has been determined. A kinetic model describing the hydrodesulfurization of LCO by hydrotreating in the presence of the Co-6-PMo12(S)/Al2O3 catalyst has been selected, and the kinetic characteristics of the HDS of the compounds constituting LCO have been determined.
Keywords:hydrotreating;light cycle oil;alumina-cobalt-molybdenum catalyst;hydrogenolysis of sulfur compounds;reaction kinetics;selection of optimum hydrotreating mode