Electrochemical oxidation of a carbon support is one of the major challenges to making proton exchange membrane fuel cells (PEMFCs) durable. The aim of this study was to develop a durable carbon-based electrocatalyst support for use in PEMFCs. Platelet-type carbon nanofiber (PCNF) was coated in a uniform and discrete manner with silica by successive hydrolysis of two kinds of silica precursors, APTES and TEOS. The shape and thickness of the silica coating on carbon was controlled by adjusting the amount of APTES and TEOS. The platinum was mainly deposited on silica rather than carbon because the zeta potential of silica is more favorable to binding platinum precursor ions than that of PCNF. Accelerated degradation testing of the silica-coated catalysts (Pt/PCNF-SiO2) and Pt/PCNF showed that Pt/PCNF-SiO2 possess higher durability than Pt/PCNF under potential cycling. After 30,000 potential cycles ranging from 1.0 V to 1.5 V, the electrochemical surface area losses were 21%, 16%, and 11% and the half-wave potential (E-1/2) degradation losses were 16 mV, 9 mV, and 8 mV for Pt/PCNF and Pt/PCNF-SiO2 with two different amounts of silica wt%. Silica-coated carbon nanofibers are expected to be a suitable electrocatalyst support for PEMFCs. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.