Journal of Industrial and Engineering Chemistry, Vol.70, 281-289, February, 2019
Thermal and characteristic analysis of shape-stabilization phase change materials by advanced vacuum impregnation method using carbon-based materials
E-mail:
This study was conducted to energy saving in buildings, with TES system. The manufacturing method of Shape-Stabilized Phase Change Materials (SSPCMs) was developed as the advanced vacuum impregnation. The validation was conducted using Activated Carbon (AC), Expanded Graphite (EG) and Exfoliated graphite (xGnP) as supporting materials and n-octadecnae was used as Phase Change Materials (PCMs). Through various experiments, the feasibility when it applied to in building, and thermal performance of this novel manufacturing method have been confirmed. Also, through the energy simulation, only 1 mm thickness of SSPCMs was applied as wall, reduced building energy up to 255.44 kWh.
Keywords:Thermal Energy Storage (TES);Latent heat;EnergyPlus;Shape-Stabilized Phase Change Materials;(SSPCMs)
- Perez-Lombard L, Ortiz J, Pout C, Energy Build., 40(3), 394 (2008)
- DOE, Buildings Energy Data Book, Office of Energy Efficiency and Renewable Energy. US Department of Energy, (2007).
- International Energy Agency, Technology Roadmap:Energy efficient building envelopes, OECD (2013).
- Romanchenko D, Kensby J, Odenberger M, Johnsson F, Energy Conv. Manag., 162, 26 (2018)
- Wi SH, Jeong SG, Chang SJ, Lee JK, Kim SM, Appl. Sci., 55, 215 (2018)
- Sharma A, Tyagi VV, Chen CR, Buddhi D, Renew. Sust. Energ. Rev., 13(2), 318 (2009)
- Dincer I, Rosen M, Thermal Energy Storage: System and Application, Wiley-Blackwell, Oxford, pp.10 2011.
- Al-Saadi SN, Zhai Z, Renew. Sust. Energ. Rev., 21, 469 (2013)
- Lee J, Wi S, Jeong SG, Chang SJ, Kim S, Thermochim. Acta, 655, 194 (2017)
- Farid MM, Khudhair AM, Razack SAK, Al-Hallaj S, Energy Conv. Manag., 45(9-10), 1597 (2004)
- Kenisarin M, Mahkamov K, Renew. Sust. Energ. Rev., 11(9), 1913 (2007)
- Chang SJ, Kang YJ, Wi SH, Jeong SG, Kim SM, Appl. Therm. Eng., 114, 457 (2017)
- Alkan C, Sarı A, Karaipekli A, Uzun O, Energy Mater. Sol. Cells, 93(1), 143 (2009)
- Ozonur Y, Mazman M, Paksoy HO, Evliya H, Int. J. Energy Res., 30(10), 741 (2006)
- Zhang XX, Deng PF, Feng RX, Song JA, Sol. Energy Mater. Sol. Cells, 95(4), 1213 (2011)
- Zhang ZG, Fang XM, Energy Conv. Manag., 47(3), 303 (2006)
- Zhang P, Hu Y, Song L, Ni J, Xing W, Wang J, Energy Mater. Sol. Cells, 94, 360 (2010)
- Chen Z, Shan F, Cao L, Fang GY, Sol. Energy Mater. Sol. Cells, 102, 131 (2012)
- Khadiran T, Hussein MZ, Zainal Z, Rusli R, J. Taiwan Inst. Chem. Eng., 55, 189 (2015)
- Kim S, Drza LT, Sol. Energy Mater. Sol. Cells, 93(1), 136 (2009)
- Kim D, ung J, Kim Y, Lee M, Seo J, Khan SB, Int. J. Heat Mass Transfer, 95, 735 (2016)
- Jeon J, Jeong SG, Lee JH, Seo J, Kim S, Sol. Energy Mater. Sol. Cells, 101, 51 (2012)
- Jin Y, Wan Q, Ding Y, Procedia Eng., 102, 1877 (2015)
- Jeong SG, Chang SJ, We S, Kim S, Sol. Energy Mater. Sol. Cells, 139, 65 (2015)
- Jeong SG, Kim S, Huh W, J. Adhes. Sci. Technol., 28(7), 711 (2014)
- Zhong YJ, Guo QG, Li SZ, Shi JL, Liu L, Sol. Energy Mater. Sol. Cells, 94(6), 1011 (2010)
- San A, Energy Conv. Manag., 117, 132 (2016)
- Tryba B, Morawski AW, Kalucki K, J. Phys. Chem. Solids, 65, 165 (2004)
- Lu ZY, Xu BW, Zhang JR, Zhu Y, Sun GX, Li ZJ, Sol. Energy, 108, 460 (2014)
- ASHRAE, ASHRAE Handbook Fundamentals, American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc., ASHRAE (2009).
- Kim SJ, Study on the Estimation of Optimum Cold and Hot Water Supply Quantity in Apartment Houses, pp.21 2000.
- Jang HI, Yoo DC, Park CY, Kang HS, Choi CH, Int. J. Sustainable Build. Technol. Urban Dev., 6(1), 48 (2015)