A practical methodology for the correlation and prediction of the process-property performance of advanced materials is developed. The model polymer studied is PMDA-ODA polyimide. The connecting link between the process and the properties is the structural state of the polymer. An essential ingredient for a quantitative characterization of the system is a knowledge of its phase state and intrinsic molecular properties. The intrinsic molecular properties define the limiting performance properties available to the polymer. Anisotropic films and sheets produced by five different fabrication processes are examined. Maps of the molecular symmetry axis, the orientation function, and the thickness distributions of two 50-in.-wide sheets fabricated differently are measured nondestructively for process comparison. Four other film fabrication processes are examined and their three-dimensional orientation states determined and correlated. A three-dimensional orientation function triangular plot permits simultaneous representation of the different fabrication processes on the same figure and allows the investigator to choose the most economic and efficient fabrication route. The structure-property study includes the structural correlation and intrinsic molecular property determination of the anisotropic coefficient of thermal expansion ( CTE), the anisotropic mechanical moduli and compliances, and the anisotropic dielectric constants.