Lubricating oils for gasoline and diesel engines are formulated to include amphiphilic dispersants for soot particle stabilization and prevention of particle aggregation. Primary and secondary amines used within the polar group of traditional dispersants provide basic nitrogen, which is able to neutralize acidic by-products from combustion and does not contribute to sulfated ash. However, these active-hydrogen-containing amines present significant problems for fluoroelastomer seals and metals in terms of degradation and corrosion. Polyisobutylene (PIB)-based dispersants containing only tertiary amines, intended to remediate these problems, were synthesized from primary-bromide-terminated PIB, 1-(2-aminoethyl)piperazine, and an anhydride such as phthalic anhydride. Intermediates and final dispersant molecules were characterized by NMR, GPC, TGA, and MALDI-TOF MS. Using Langmuir adsorption studies with carbon black as a surrogate for soot, a direct dependence on the affinity for adsorption of the dispersant with respect to the number of phenyl rings present was identified. Performance testing revealed increased compatibility of the dispersants, including limited degradation of seals and corrosion of metals, while retaining total base number. (c) 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018, 56, 1657-1675