Liquid water transport in the gas flow channel is significantly important for the water removal and management in proton exchange membrane fuel cells. Previous numerical studies consider a single and constant static contact angle for the liquid water transport on the channel surface, which is insufficient to account for the dynamic wettability behavior of the flow. In this study, a dynamic wettability model is developed that incorporates the sliding angle and dynamic contact angles for the simulation of water transport in the flow channel. It is found that both the sliding and dynamic contact angles have significant impact on the characteristics of the water transport and dynamics in the flow channel. Water spreading on the channel surface is elliptic, and its minor and major axes oscillate out of phase with the droplet height. The pressure loss for the 2-phase flow in the channel is directly related to this oscillation and deformation of the droplet shape. Flow channel surface with a small sliding angle facilitates the water transport and removal and reduces the associated pressure loss in the channel. The conventional static wettability model would overpredict droplet deformation and breakup as well as the pressure loss in the channel.