Hollow Ni/Co-S microspheres prepared through a precursor sulfuration route were reported here. The precursor was first generated at 150 degrees C for 24 h by a solvothermal process, employing Ni(NO3)(2), Co(NO3)(2) and 1,3,5-Benzenetricarboxylic acid (BTC) as the original reactants, and ethylene glycol (EG) as the solvent. Then, the precursor was sulfurized in a water-EG mixed solvent at 180 degrees C for 18 h to form hollow Ni/Co-S microspheres. The as-obtained product was characterized by FESEM, TEM, XRD, IR, XPS, and EDS mapping. It was found that the electrochemical properties of hollow Ni/Co-S microspheres strongly depended on the original molar ratio of Ni2+/Co2+. The product prepared from the system with the Ni2+/Co2+ molar ratio of 2:1 (labeled as 2Ni-Co-S) exhibited the best electrochemical performances. At a current density of 1 A g(-1), the specific capacitance of 2Ni-Co-S reached 1397 mAh g(-1); and even at a current density of 10 A g(-1), the specific capacitance still reached 908 mAh g(-1). After 2000 cycles, the specific capacitance still retained similar to 114% of the initial value and similar to 76.0% of the biggest capacitance, exhibiting excellent cycling stability. Also, a hybrid battery assembled with 2Ni-Co-S and activated carbon owned the energy density of 178.97 Wh kg(-1) at a power density of 1.96 kW kg(-1); and even at a power density of 9.3 kW kg(-1), the energy density still achieved 148.4 Wh kg(-1), indicating that the as-obtained hollow Ni/Co-S microspheres have potential applications for energy storage as high performance electrode materials.