Conversion of temperature fluctuations to useable electrical energy is rendered by the pyroelectric effect. Waste of heat in our day to day environment and in industrial sector constitutes an abundant source of energy. Herein, we report a pyroelectric generator (PyG) that produces pyroelectric output up to 1.5 V and 1.5 mu A. Its power density is 0.034 mu W/cm(2) upon exposure to heat-cool condition for a temperature variation from 310 K to 340 K. Due to the fast response time (121 ms) of the PyG, it is expected to be use as a self-powered temperature sensor. The generated electricity could also be stored in a capacitor up to 0.8 V in three heating-cooling cycles. It has been also demonstrated that PyG is possible to drive by water vapour where energy-consuming alternating devices is not necessary. The temperature oscillation achieved by spontaneous water condensation and evaporation from the surface of the PyG that produces open-circuit voltage of 1.6 V for a temperature variation from 303 K to 333 K. Thus the PyG driven by water vapour supports an efficient retrieval of energy from hot water vapour, which is wasted mostly. The linear increment of voltage as a function of temperature indicates PyG is also suitable to use a temperature sensor that may also work in self-powered mode. In addition, the PyG can also harvest the waste body heat, i.e., heat dissipation from human body surface and from the process of respiration. That promises an effective self-powered temperature sensor that might be useful in healthcare monitoring, safety and security sectors. [GRAPHICS] .