Isocyanates are highly reactive and toxic substances with severe health effects. Certain diisocyanates are restricted under REACH - The European Regulation on Registration, Evaluation, Authorisation and Restriction of Chemicals. Triethyleneglycol diglycidyl ether (TEGDGE) was used as an alternative to toxic isocyanates for the cross-linking of hydroxyl-terminated pre-polymers at 70 degrees C. The effect of three curing accelerators was determined while following the reaction kinetics by H-1-NMR spectroscopy and differential scanning calorimetry (DSC). Polybutadiene (Poly BD R45HT-LO) and acrylic ester (HyTemp 4454) successfully cross-linked in 7-10days to produce thermally stable networks with low glass transition temperatures, as observed by DSC. Pre-aging the polybutadiene resin promoted cross-linking with TEGDGE. Four energetic compositions were then prepared using cyclotrimethylenetrinitramine (RDX) and pentaerythritoltetranitrate (PETN) as fillers, and polybutadiene (Poly BD R45HT-LO) and acrylic ester (HyTemp 4454) as binders. Both binders successfully cross-linked with TEGDGE in the presence of RDX and PETN, but only PETN was found to be chemically compatible with the cross-linked polymers. These results show that TEGDGE is suitable as a replacement for toxic isocyanates for the cross-linking of hydroxyl-terminated polyols.