In this study, nanocomposite blend membrane comprised of the sulfonated poly (ether ether ketone) (SPEEK), sulfonated poly (vinilidinfluoride-co-hexaflourpropylen) (SPVDF-co-HFP) and lanthanum chromite (LaCrO3) was successfully prepared by the solvent casting method. The prepared membranes exhibit a variety of advantages, such as desirable proton conductivity, good thermal and mechanical stability, outstanding water and methanol retention and oxidative stability. The increase in proton conductivity from 32.7 mS cm(-1) in SPEEK/SPVDF-co-HFP blend membrane to 75.3 mS cm(-1) in nanocomposite membrane is achieved at the nanoparticle content of 1.5 wt% at 20 degrees C, stemming from enhanced connectivity of the ionic groups which facilitates the proton transportation through the membrane. Also, the methanol permeability of the nanocomposite membranes was altered from 2.11 x 10(-7) to 1.90 x 10(-7) cm(2) s(-1), by addition of 1.5 wt% LaCrO3 nanoparticles, which show this membrane can act as effective barrier against methanol permeation. Moreover, the maximum power density of blend membrane was increased from 43.0 to 61.5 mWcm(-2) with addition of 1.5 wt% nanoparticles and this results show that the nanocomposite membranes could be applied as a promising candidate as a proton exchange membrane for direct methanol fuel cells (DMFCs). Published by Elsevier Ltd.