Fabrication of large area, multiscale micro textured surfaces engineered for antiadhesion properties remains a challenge. Compared to an elastic surface, viscoelastic solids show much higher surface stickiness, tack, and adhesion owing to the increased contact area and energy dissipation. Here, we show a simple, low cost, large-area and high throughput method with roll-to-roll compatibility to fabricate multiscale, rough microstructures resistant to adhesion in a viscoelastic layer by controlled tearing of viscous film. Even a high adhesive strength viscoelastic solid layer, such as partially cured PDMS, is made nonsticky simply by its controlled tearing. The torn surface shows a fracture induced, self-organized leaflike micropattern resistant to sticking. The topography and adhesion strength of these structures are readily tuned by changing the tearing speed and the film thickness. The microtexture displays a springlike recovery, low adhesive strength, and easy release properties even under the high applied loads.