Electrochemical desalination devices that use redox-active cation intercalation electrodes show promise for desalination of salt-rich water resources with high water recovery and low energy consumption. While previous modeling and experiments used ion-exchange membranes to maximize charge efficiency, here a membrane-free alternative is evaluated to reduce capital cost by using a porous diaphragm to separate Na1+xNiFe(CN)(6) electrodes. Two-dimensional porous-electrode modeling shows that, while charge efficiency losses are inherent to a diaphragm-based architecture, charge efficiency values approaching the anion transference number (61% for NaCl) are achievable for diaphragms with sufficiently low salt conductance. Closed-form equations are thereby derived that relate charge efficiency to the non-dimensional Peclet and Damkohler numbers that enable the selection of current and flow velocity to produce a desired degree-of-desalination. Simulations using these conditions are used to quantify the tradeoffs between energy consumption and salt removal rate for diaphragm-based cells operated at a range of currents. The simulated distributions of reactions are shown to result from the local salt concentration variations within electrodes using diffusion-potential theory. We also simulate the cycling dynamics of various flow configurations and show that flow-through electrodes exceed the degree-of-desalination compared with flow-by and flow-behind configurations due to solution stagnation within electrodes. (C) 2018 Elsevier Ltd. All rights reserved.