ZrCo1-xMnx (x = 0-0.1) alloys for tritium storage were prepared by induction levitation melting under an argon atmosphere. The effect of Mn substitution for Co on the alloy microstructure, initial activation behavior, hydrogen storage kinetics and thermodynamics was investigated. The results show that the ZrCo1-xMnx (x = 0, 0.025, 0.05) alloys have a single phase of ZrCo, while ZrCo1-xMnx (x = 0.075, 0.1) alloys consist of a main phase of ZrCo and a secondary phase of ZrMn2. It is observed that the initial activation time (uptake to 95% of saturated hydrogen capacity) decreases from 63.73 h to 0.24 h as the Mn content increases from x = 0 to x = 0.1. However, Mn substituted for Co is determined to result in disproportionation during activation and a loss in hydrogen capacity. For increasing Mn content in the alloy, the plateau width for Pressure-Composition-Temperature (P-C-T) curve is shortened, while the plateau pressure remains mostly unchanged. DSC measurements were also performed to investigate the thermal stability of the ZrCo1-xMnx system. (C) 2017 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.