화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Polymer(Korea), Vol.41, No.6, 1027-1032, November, 2017
DOI10.7317/pk.2017.41.6.1027  Export Citation
실리카와 전분이 보강된 스티렌-부타디엔 고무 복합체
Silica-Starch Reinforced Styrene-Butadiene Rubber Composites
Qingyuan Li1, Xiangxu Li2, 장선호2, 이담희2, Yuan Fan2, 조을룡1, 2, †
  • 1친환경고성능화학소재연구소
  • 2한국기술교육대학교 에너지, 신소재, 화학공학부
Qingyuan Li1, Xiangxu Li2, Sun-Ho Jang2, Dam-Hee Lee2, Yuan Fan2, and Ur Ryong Cho1, 2, †
  • 1Research Center of Eco-Friendly & High Performance Chemical Materials, Korea University of Technology and Education, Cheonan, Chungnam 31253, Korea
  • 2School of Energy, Materials and Chemical Engineering, Korea University of Technology and Education, Cheonan, Chungnam 31253, Korea
E-mail:
Silica-starch-reinforced styrene-butadiene rubber (SBR) was prepared by a modified sol-gel method of mixing the silica sol, the starch paste, and then in situ blending the SBR latex. The fracture surface of the samples after the tensile test was characterized by FE-SEM. The tensile strength, the storage modulus, the hardness and the swelling test of the vulcanized samples were systematically discussed. The results showed the elongation at break, the hardness and the storage modulus increased with the increasing of silica in the as-prepared samples. The swelling ratio decreased with increase in the content of silica, indicative of the excellent crosslink density in the silica-starch-reinforced SBR.
Keywords:silica;starch;styrene-butadiene rubber;sol-gel;in situ
  1. Ramier J, Gauthier C, Chazeau L, Stelandre L, Guy L, J. Polym. Sci. B: Polym. Phys., 45(3), 286 (2007)
  2. Poompradub S, Thirakulrati M, Prasassarakich P, Mater. Chem. Phys., 144(1-2), 122 (2014)
  3. Kohjiya S, Murakami K, Iio S, Tanahashi T, Ikeda Y, Rubber Chem. Technol., 74, 16 (2001)
  4. Makavipour F, Pashley RM, Chem. Eng. J., 262, 119 (2015)
  5. Lauwaert J, De Canck E, Esquivel D, Thybaut JW, Van Der Voort P, Marin GB, ChemCatChem, 6, 255 (2014)
  6. Rostamnia S, Doustkhah E, RSC Adv, 4, 28238 (2014)
  7. Li Y, Han B, Wen S, Lu Y, Yang H, Zhang L, Liu L, Compos. Pt. A-Appl. Sci. Manuf., 62, 52 (2014)
  8. Zhu Q, Gao QW, Guo YL, Yang CQ, Shen L, Ind. Eng. Chem. Res., 50(10), 5881 (2011)
  9. Tangpasuthadol V, Intasiri A, Nuntivanich D, Niyompanich N, Kiatkamjornwong S, J. Appl. Polym. Sci., 109(1), 424 (2008)
  10. Miloskovska E, Nies E, Hristova-Bogaerds D, van Duin M, de With G, J. Polym. Sci. B: Polym. Phys., 52(14), 967 (2014)
  11. Ikeda Y, Tanaka A, Kohjiya S, J. Mate. Chem, 7, 455 (1997)
  12. Ikeda Y, Kohjiya S, Polymer, 38(17), 4417 (1997)
  13. Tanahashi H, Osanai S, Shigekuni M, Murakami K, Ikeda Y, Kohjiya S, Rubber Chem. Technol., 71, 38 (1998)
  14. Siramanont J, Tangpasuthadol V, Intasiri A, Na-Ranong N, Kiatkamjornwong S, Polym. Eng. Sci., 49(6), 1099 (2009)
  15. Manna AK, De PP, Tripathy DK, De SK, Peiffer DG, J. Appl. Polym. Sci., 74(2), 389 (1999)
  16. Ikeda Y, Poompradub S, Morita Y, Kohjiya S, J. Sol-Gel Sci. Technol., 45, 299 (2008)
  17. Poompradub S, Kohjiya S, Ikeda Y, Chem. Lett., 34(5), 672 (2005)
  18. Djetoui Z, Djerboua F, Perena JM, Benavente R, Iranian J. Chem. Chem. Eng., 36, 159 (2017)
  19. Jantanasakulwong K, Leksawasdi N, Seesuriyachan P, Wongsuriyasak S, Techapun C, Ougizawa T, Eur. Polym. J., 84, 292 (2016)
  20. Wu YP, Ji MQ, Qi Q, Wang YQ, Zhang LQ, Macromol. Rapid Commun., 25(4), 565 (2004)
  21. Peterson SC, J. Elastomer Plast., 44, 43 (2012)
  22. Wu YP, Qi Q, Liang GH, Zhang LQ, Carbohydr. Polym., 65, 109 (2006)
  23. Asaro F, Benedetti A, Freris I, Riello P, Savko N, Langmuir, 26(15), 12917 (2010)
  24. Karmakar B, De G, Ganguli D, J. Non-Cryst. Solids, 272, 119 (2000)
  25. Yin CJ, Zhang QY, Gu JW, Zheng JC, Gong GB, Liang T, Zhang HP, J. Appl. Polym. Sci., 128(4), 2262 (2013)
  26. Suzuki N, Yatsuyanagi F, Ito M, Kaidou H, J. Appl. Polym. Sci., 86(7), 1622 (2002)
  27. Yatsuyanagi F, Suzuki N, Ito M, Kaidou H, Polymer, 42(23), 9523 (2001)
  28. Yatsuyanagi F, Suzuki N, Ito M, Kaidou H, Polym. J., 34, 332 (2002)
  29. Liu X, Zhao SH, Zhang XY, Li XL, Bai Y, Polymer, 55(8), 1964 (2014)
  30. Sittiphan T, Prasassarakich P, Poompradub S, Mater. Sci. Eng. B-Solid State Mater. Adv. Technol., 181, 39 (2014)
  31. Payne AR, Whittaker RE, Rubber Chem. Technol., 44, 440 (1971)
  32. Reuvekamp L, Ten Brinke JW, Van Swaaij PJ, Noordermeer JWM, Rubber Chem. Technol., 75, 187 (2002)
  33. Gui Y, Zheng J, Ye X, Han D, Xi M, Zhang L, Compos. Part B-Eng., 85, 130 (2016)