Surface wettability is typically characterized by measuring the static contact angle of a sessile droplet placed on the surface. For extremely wetting surfaces on which liquid spontaneously spreads into a thin liquid film, the near-zero static contact angle is not amenable to measurement and does not fully describe the wetting behavior. There are unmet needs in microfluidics, boiling heat transfer enhancement, and antifog-ging applications for a metric to characterize highly wetting (i.e., superhydrophilic) textured surfaces based on their capillary driven liquid pumping performance, as a supplement to the contact angle for this highly wetting regime. To describe the wetting behavior, the textured surface can be approximated as a thin porous layer through which the liquid spreads. An analytical model is developed for the volumetric flow in this layer, which reveals, a Single superhydrophilicity metric that captures the wetting behavior for a given liquid. A simple experimental approach is proposed to characterize this metric by measuring the volumetric liquid intake into the surface from a filled capillary tube. This approach is validated by characterizing micropillared superhydrophilic surfaces of known geometry; the predicted and measured wetting behaviors show good agreement. The metric proposed in this study offers a simple approach for accurately characterizing and differentiating highly wetting surfaces based on their liquid pumping ability.