P2-type manganese-based ternary transition metal oxides have triggered extensive researches as potential cathode materials for sodium ion batteries. However, these kinds of materials display the large difference in electrochemical performance with sodium content varying from 0.45 to 0.8, the relevant investigations on effects of sodium content are insufficient. In this work, we synthesize a series of spherical P2-type cathode materials NaxNi0.167Coo.167Mno.67O2 with different sodium content (x = 0.45, 0.55, 0.67, 0.8, 0.9, 1) and investigate the effects of sodium content on structure and electrochemical performance. The results reveal that NaxNi0.167Co0.167Mn0.67O2 (x = 0.45, 0.55) consist of P2-phase and P3-phase, while NaxNi0.167CO0.167Mn0.67O2 (x = 0.67, 0.8, 0.9, 1) exhibit pure P2-phase. Na0.45Nio.167Co0.167Mn0.67O2 delivers an initial discharge capacity of 143 mAh g(-1), while a fast capacity decay is observed after 50 cycles. In comparison, Na0.67Ni0.167Co0.167Mn0.67O2 shows excellent cycling stability and rate performance. The significant difference in electrochemical performance is attributed to the initial sodium. content, which leads to the existence of P3-phase. Moreover, higher sodium content promotes primary particles to grow larger and thicker, which is not favorable for the diffusion of Nat. Generally, Na0.67Ni0.167Co0.167Mn0.67O2 is favored by suitable sodium content, offers excellent electrochemical performance in terms of capacity, rate performance and cycling stability. (C) 2017 Elsevier B.V. All rights reserved.