Chromium nitride (CrN) synthesized by heating at 550 degrees C under a continuous stream of ammonia has been investigated as anode material for lithium electrochemistry. Due to its low lithium insertion potential, Cr is an attractive material for lithium-ion battery application, but the usual volume variation effect obstructs its practical use. In this study, different concentrations of carbon nanotubes doped with nitrogen (NCNTs) are combined with CrN to attain high electrochemical performance. The synthesized CrN/0.08%-NCNTs nanocomposite demonstrates network structure with 30-40 nm CrN nanoparticles anchored to specific sites on 40-60 nm diameter NCNTs. Upon electrochemical testing, CrN/0.08%-NCNTs nanocomposite displays a discharge capacity of 1172 mAh g(-1) after 200 cycles with high coulombic efficiency (similar to 100%) and rate capability. The electrode can deliver a reversible capacity of 1042.9 mAh g(-1) at 20 C. The n-type concentration, along with the conductive CNTs framework, mesoporous channels, appropriate surface area and buffering capability of CNTs, are together responsible for the excellent electrochemical performance. The electrochemical reaction mechanism of CrN with lithium is explored by investigating the structural changes using ex situ X-ray photoelectron spectroscopy, X-ray diffraction, selected area electron diffraction, and high-resolution transmission electron microscopy. The reversible conversion reaction of CrN into Cr metal and Li3N is revealed. (C) 2017 Elsevier B.V. All rights reserved.