- Previous Article
- Next Article
- Table of Contents
Korean Journal of Materials Research, Vol.27, No.8, 451-458, August, 2017
Capillary Water Absorption Properties of Steel Fiber Reinforced Coal Gangue Concrete under Freeze-Thaw Cycles
E-mail:
The service life of coal gangue concrete(CGC) strongly depends on the capillary water absorption, this water absorption is susceptible to freeze-thaw cycles. In this paper, the cumulative water absorption and sorptivity were obtained to study the effects of 0, 0.5, 1.0, and 1.5 % steel fiber volume fraction added on the water absorption of CGC. Sorptivity and freeze-thaw tests were conducted, and the capillary water absorption was evaluated by the rate of water absorption(sorptivity). Three prediction models for the initial sorptivity of steel fiber reinforced coal gangue concrete(SFRCGC) under freeze-thaw cycles were established to evaluate the capillary water absorption of SFRCGC. Results showed that, without freeze-thaw cycles, the water absorption of CGC decreased when steel fiber at 1.0 % volume fraction was added, however, the water absorption increased with the addition of 0.5 or 1.5% steel fibers. Once the SFRCGC specimens were exposed to freeze-thaw cycles, the water absorption of SFRCGC significantly increased, and 1.0 % steel fiber in volume fraction added to CGC caused the lowest water absorption, except for the case of the sample without steel fibers added. The CGC with steel fiber at 1.0 % volume fraction performed better. The SFRCGC has a strong response to freeze-thaw cycles. Results also showed that the linear function prediction model is practical in the field of engineering because of its simple form and a relatively high precision. Although the polynomial prediction model presents the highest computation precision among the three models, the complicated form and too many coefficients make it impractical for engineering applications.
Keywords:steel fiber reinforced coal gangue concrete(SFRCGC);capillary water absorption;freeze-thaw cycles;the rate of water absorption(sorptivity);prediction model
- Wang Z, Zhao N, J. Nat. Sci. Wuhan. Univ., 20, 066 (2015)
- Wang Z, Zhao N, J. Nat. Sci. Wuhan. Univ., 19, 262 (2014)
- Huang C, Thesis MS (in Chinese), p.33-58, Shenyang Jianzhu University, ShenYang, (2015).
- Yehia S, Douba A, Abdullahi O, Farrag S, Constr. Build. Mater., 121, 120 (2016)
- Ati CD, Karahan O, Constr. Build. Mater., 23, 392 (2009)
- Kim SW, Jang SJ, Kang DH, Ahn KL, Yun HD, Materials, 8, 7309 (2015)
- Kayali O, Haque MN, Zhu B, Cement Concrete Compos., 25, 207 (2003)
- Topcu IB, Canbaz M, Constr. Build. Mater., 21, 1486 (2007)
- Karahan O, Ozbay E, Ati CD, Lachemi M, Hossain KMA, KSCE. J. Civ. Eng., 20, 2783 (2016)
- Niu DT, Jiang L, Bai M, Miao YY, Mater. Des., 44, 267 (2013)
- Belleghem BV, Montoya R, Dewanckele J, Steen VNd, Graeve ID, Deconinck J, Cnudde V, Tittelboom KV, Belie ND, Constr. Build. Mater., 110, 154 (2016)
- Gonen T, Yazicioglu S, Demirel B, KSCE. J. Civ. Eng., 19, 667 (2015)
- ASTM C1585, American Society for Testing Materials, West Conshohocken, PA, USA, (2013).
- GB/T 50082-2009, Chinese standard Institution, China Architecture & Building Press, Beijing, China, (2009).
- Hall C, Mag. Concrete Res., 41, 51 (1989)