The dynamic flowsheet simulation of solids processes is an area of increasing interest in recent years. Compared to the well-established flowsheet modelling of liquid-gas systems, the modelling of granular materials requires different approaches, strategies and algorithms. Therefore the new dynamic flowsheet simulation framework Dyssol has been developed within the Priority Program SPP 1679 "Dynamic simulation of interconnected solids processes (DYNSIM-FP)" of the German Research Foundation (DFG). In this contribution the architecture of the novel simulation framework and computational methods employed in it are presented. The system is based on the sequential-modular approach supplemented with partitioning and tearing methods. Waveform relaxation method, as well as several convergence methods and data extrapolation algorithms have been implemented to improve system performance and to increase convergence rate. To perform a correct calculation of multidimensional distributed parameters an approach with transformation matrices is used in the Dyssol system. Simulation case studies calculated with new system have showngood stability, convergence rate and agreement of simulation results with test systems and experimental results. (C) 2017 Elsevier B.V. All rights reserved.