The adsorption of phenolic compounds from wine vinasses onto non ionic resins was investigated with the goal of recovering antioxidant components from the effluent. Batch studies showed that the kinetic data fit to a pseudo-second order kinetic model. Dynamic adsorption studies with macroporous resins packed columns were also conducted to analyze the effect of initial phenolic concentration, the elution speed and the length of the packed bed on breakthrough curves. The experimental data showed that with increased column bed depth from 10 to 20 cm, breakpoint time (t(b)) increased from 19.6 to 25.6 min. The breakthrough curve was simulated well by Bohart-Adams, Yoon-Nelson and Thomas models. Bohan Adams model was the only effective to fit the initial part (1-t(1/2)). The maximum removal capacity (q(Th)) calculated by Thomas model reached 98.3 mg/g at a flow rate of 5 mL/min. (C) 2017 Elsevier Ltd. All rights reserved.