To enhance azo dye reduction in cathode of microbial fuel cells (MFCs) and power generation, a novel cathode modification method was developed on carbon paper (CP) through immobilization of redox mediators (RMs) with self-assembled peptide nanotubes (PNTs) as the carrier. Results showed that the optimum peptide concentration for PNT self-assembly on electrode and Orange II decolorization in MFCs was 2 mg mL(-1). The PNT/RMs/CP electrodes exhibited higher electrocatalytic activities than PNT or RM solely modified electrodes and raw carbon paper electrode. MFCs loaded with the riboflavin (RF)/PNT modified cathode (PNT/RF/CP) or anthraquinone-2, 6-disulfonate (AQDS)/PNT modified cathode (PNT/AQDS/ CP) showed an enhanced decolorization rate to Orange II compared to that with the control electrode, with the reduction kinetic constants increased by 1.3 and 1.2 folds, respectively. Furthermore, the MFCs with the PNT/AQDS/CP cathode and PNT/RF/CP cathode generated a higher maximum power density of 55.5 mW m(-2) and 72.6 mW m(-2), respectively, compared to the control (15.5 mW m(-2)). The PNT/RMs modification could reduce cathode total internal resistance and accelerate electron transfer from electrodes to dyes, which may result in the enhanced performance of MFCs. (C) 2017 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.