A pyrolytic lignin, separated from the bio-oil generated from biomass fast pyrolysis bio-oil at 500 degrees C via cold-water extraction, was thermally decomposed in a drop-tube/fixed-bed reactor under inert conditions at 100-350 degrees C. It is found that the char yield of the pyrolytic lignin under such fast pyrolysis conditions decreases rapidly from similar to 82% at 100 degrees C to similar to 23% at 350 degrees C. The majority of the weight loss is contributed by the significant reduction in the fraction of light aromatic oligomers (i.e., the CH2Cl2-soluble fraction) retained in the pyrolytic lignin chars, with such reductions increasing with temperature. On the contrary, there is insignificant change in the fraction of heavy aromatic oligomers (i.e., the CH2Cl2-insoluble fraction) retained in the pyrolytic lignin chars during pyrolysis at such low temperatures. It is evident that there are strong interactions between the light and heavy aromatic oligomers during thermal decomposition of the pyrolytic lignin, leading to the observed additional char formation. The main reactions during thermal decomposition of the pyrolytic lignin are the release of aliphatic and small phenolic compounds (i.e., via demethylation and decarbonylation reactions), mainly due to the breaking of ether bonds in the pyrolytic lignin structure. The char structure becomes more aromatic as temperature increases, due to the enhanced polymerization reactions at high temperatures (>250 degrees C). (C) 2017 Elsevier Ltd. All rights reserved.