In this work, a CO2 sorbent was prepared by immobilizing tetraethylenepentamine (TEPA) onto modified carbon nanotubes. Modification of carbon nanotubes (CNTs) using a KOH reagent was done to increase the surface area and pore volume of the CNTs. The prepared sorbents were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) thermogravimetric analysis (TGA), and Brunauer-Emmett-Teller ( BET) analyses. At the optimal TEPA loading of 75 wt% on modified CNTs (MCNTs), the CO2 sorption capacity reached 5 mmol CO2/g-sorbent for 10 vol% CO2 in N-2 along with 1 vol% H2O at 60 degrees C. Kinetic and thermodynamic adsorption studies found activation energies for CO2 adsorption and desorption of MCNTs/TEPA being16.2 kJ/mol and 39.9 kJ/mol, respectively. The low activation energy for CO2 desorption using MCNTs/TEPA corresponds with a high CO2 desorption rate, resulting in a low CO2 capture cost. Therefore, the MCNTs/TEPA sorbent has potential for application to CO2 capture from gas mixtures. (C) 2017 Elsevier Ltd. All rights reserved.