Currently, few processes can be considered practical alternatives to the use of petroleum for liquid fuel production. Among these alternatives, the FischerTropsch synthesis (FTS) reaction has been successfully applied commercially. Nevertheless, many of the fundamentals of this process are difficult to understand because of its complexity, which depends strongly on the catalyst and the reactor design and operating conditions, as the reaction is seriously affected by mass and heat transport issues. Thus, studying this reaction system with transport phenomena models can help to elucidate the impact of different parameters on the reaction. According to the literature, modeling FTS systems with 1D models provides valuable information for understanding the phenomena that occur during this process. However, 2D models must be used to simulate the reactor to correctly predict the reactor variables, particularly the temperature, which is a critical parameter to achieve a suitable distribution of products during the reaction. Thus, this work provides a general resume of the current findings on the modeling of transport phenomena on a particle/pellet level in a tubular fixed-bed reactor.