A10-parameter Electrical Equivalent Circuit (10-parameter EEC) has been proposed to evaluate the electrochemical characterizations which are resistance, reactance and relaxation frequency of Lithium-ion battery (LIB) slurry under different components weight ratio of three samples composed of PVDF-NMP solution, Carbon Black (CB) absent slurry and CB present slurry. The 10-parameter EEC is constructed by combining the internal structure of LIB slurry and the electrochemical responses of three samples. Four conclusions are clarified by fitting Electrochemical Impedance Spectroscopy (EIS) Nyquist and Bode plots with the 10-parameter EEC. Firstly, the standard deviation S of the 10-parameter EEC < S10-p> = 14.3% is lower than that of a conventional 8-parameter EEC < S8-p> = 30.6% by Delta S = 16.3%. Secondly, the resistance of electric double layer (EDL) R-dl is firstly increased and then decreased as LiCoO2 particles weight ratio wtLiCoO(2) is increased, which is well explained by LiCoO2-PVDF ratio effect. Thirdly, the resistances of PVDF-NMP solution RSO and conductive path Rp are the resistances of LiCoO2-NMP interface dispersion and PVDF-NMP solution dispersion in LIB slurry. Lastly, relaxation frequencies of LiCoO2-NMP interface dispersion f(relax, high) and PVDF-NMP solution dispersion f(relax, low) obtained from EIS experiment can be represented by those of f(relax1) and f(relax2) calculated from the 10-parameter EEC. (C) 2016 The Electrochemical Society.