This study measures polycyclic aromatic hydrocarbon (PAH) compositions in particulate matter emissions from residential cookstoves. A variety of fuel and cookstove combinations are investigated, including: (i) liquid petroleum gas (LPG), (ii) kerosene in a wick stove, (iii) wood (10 and 30% moisture content on a wet basis) in a forced-draft fan stove, and (iv) wood in a natural-draft rocket cookstove. The wood burning in the natural-draft stove had the highest PAH emissions followed by the wood combustion in the forced-draft stove and kerosene burning. LPG combustion has the highest thermal efficiency (similar to 57%) and the lowest PAH emissions per unit fuel energy, resulting in the lowest PAH emissions per useful energy delivered (in the unit of megajoule delivered, MJ(d)). Compared with the wood combustion emissions, LPG burning also emits a lower fraction of higher molecular weight PAHs. In rural regions where LPG and kerosene are unavailable or unaffordable, the forced-draft fan stove is expected to be an alternative because its benzo[a]pyrene (B [413) emission factor (5.17-8.24 mu g B[a]P/MJ(d)) and emission rate (0.522-0.583 mu g B[a]P/min) are similar to those of kerosene burning (5.36 mu g B[a]P/MJ(d) and 0.452 mu g B[a]P/min). Relatively large PAH emission variability for LPG suggests a need for additional future tests to identify the major factors influencing these combustion emissions. These future tests should also account for different LPG fuel formulations and stove burner types.