Applied Surface Science, Vol.402, 136-141, 2017
Development and surface characterization of a glucose biosensor based on a nanocolumnar ZnO film
Highly oriented nanostructured ZnO films were grown on the surface of stainless steel plates (ZnO/SS) by chemical bath deposition (CBD). The films consisted of vertically aligned ZnO nanocolumns, similar to 1 m long and similar to 80 nm wide, as observed by SEM (scanning electron microscopy) and FIB (focused ion beam). XRD (X-ray diffraction) confirmed the c-axis preferred orientation of the ZnO columns, which were functionalized with the glucose oxidase (GOx) enzyme into a biosensor of glucose. The electrochemical response studied by CV (cyclic voltammetry) proved that the biosensor was capable of detecting glucose from 1.5 up to 16 mM concentration range. XPS (X-ray photoelectron spectroscopy) analysis, excited with synchrotron radiation, probed the atom specific chemical environment at the electrode's surface and shed some light on the nature of the ZnO-GOx interaction.(C) 2017 Elsevier B.V. All rights reserved.
Keywords:ZnO;Nanocolumns;Glucose oxidase;X-ray photoelectron spectroscopy;Synchrotron;X-ray diffraction