The mechanism governing the electrical properties for phase separating blends containing multiwall carbon nanotubes (MWNTs) is unravelled by tuning the compatibilization efficiency. Thereto, compatibilization by interfacially segregated block and random copolymers (cp) of poly(styrene-random/block-methyl methacrylate)(PS-r/b-PMMA) was achieved in phase separating blends of poly[(alpha-methyl styrene)-co-acrylonitrile]/poly(methylmethacrylate) (P alpha MSAN/PMMA) undergoing spinodal decomposition. A systematic study of the effects of copolymer architecture and molecular weight on the percolating network of selectively localized MWNTs is performed. Effective compatibilization is achieved with block cp irrespective of the ability of the blocks to entangle, whereas for random cp only long random cp having the ability to effectively entangle with the homopolymers are as efficient as long block cp. With increasing copolymer concentration, an increase and subsequent saturation of the electrical conductivity is attained. This originates from an increased connectivity and refinement of the MWNT laden P alpha MSAN phase, as confirmed by optical microscopy and the linear viscoelastic response of the blends. An effective compatibilizer led to an interfacial tension mediated suppression of an interfacial coarsening of the PaMSAN phase during phase separation, subsequently leading to percolation of MWNTs selectively localized in the PaMSAN phase. Furthermore, the copolymer having the ability to promote the development of a percolated network of MWNTs also allowed the network to be formed at a lower copolymer concentration as compared to that of blends with copolymers leading to restricted improvement in the connectivity of MWNTs. Our robust and simple procedure to tune the blend morphology via the efficiency of the compatibilizers can be used to achieve a synergistic increase in conducting properties. (C) 2016 Elsevier Ltd. All rights reserved.