The fate of four benzotriazoles [1-H-benzotriazole (1-H-BTRi), tolyltriazole (TTRi), xylyltriazole (XTRi) and 1-hydroxy-benzotriazole (1-OH-BTRi)] and three benzothiazoles [benzothiazole (BTH), 2-hydroxybenzothiazole (2-OH-BTH) and 2-amino-benzothiazole (2-amino-BTH)], during chlorination batch experiments was investigated. In the first step, their degradation under different experimental conditions (applied molar ratio of NaOCl and the target contaminant (m.r.), reaction's contact time, pH value of the reaction's solution and the influence of total suspended solids (TSS) presence) was investigated and their removal kinetics parameters (k(obs) and t(1/2)) were determined. In the second step, LC-QTOFMS/MS was used for the detection and identification of transformation products (TPs) formed during chlorination, through the application of suspect and non-target screening approaches. Four and five TPs of XTRi and 2-amino-BTH, respectively, were detected and tentatively identified, while 1-H-BTRi was proven to be formed by the chlorination of 1-OH-BTRi. Moreover, since the identified TPs were also detected in spiked wastewater samples, after lab-scale chlorination experiments, toxicity assessment was carried out by ECOSAR calculations for the environmental relevance of their occurrence. The proposed chlorinated TPs were proven to be more toxic than their parent compounds. (C) 2016 Elsevier B.V. All rights reserved.