Coincident (simultaneous) three-component particle velocity measurements performed using two laser Doppler anemometry probes at the outlet section of a 9 m high cylindrical riser are for the first time presented for dilute flow conditions. Near the blinded extension of the T-outlet a solids vortex is formed. Particle downflow along the riser wall opposite the outlet tube is observed, which is restricted to higher riser heights at higher gas flow rates. Increased velocity fluctuations are observed in the solids vortex and downflow region as well as at heights corresponding to the outlet tube. Contrary to the rest of the riser, in the downflow region time and ensemble velocity averages are not equal. Given the local bending of the streamlines, axial momentum transforms to radial and azimuthal momentum giving rise to the corresponding shear stresses. Turbulence intensity values indicate the edges of the downflow region. (C) 2016 The Authors AIChE Journal published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers AIChE J, 62: 3575-3584, 2016