Solar Energy, Vol.136, 268-277, 2016
Parabolic trough solar receivers characterization using specific test bench for transmittance, absorptance and heat loss simultaneous measurement
Parabolic trough is the most extended solar thermoelectric technology. Solar radiation is converted into heat and transferred to the heat transfer fluid in the solar receiver tubes. The thermal energy obtained feeds a conventional Rankine power cycle. The performance of the receiver tube can be broken down into three single components: the optical transmittance of the outer glass envelope or capability in transmitting the radiant energy; the optical absorptance of the metal tube or capability to absorb the radiation; and heat losses of the tube or capability to retain the heat which depends of inner tube coating emissivity and the vacuum between both tubes. In this paper a novel test bench implementing both thermal and optical measurement systems is described and compared with other systems referred in the literature. The results obtained from the evaluation of three different solar receivers with different diameters are presented. Optical measurements of transmittance and absorptance parameters are carried out in the wavelength range of 300-2500 nm. Optical evaluation of trough receivers at operating temperatures up to 450 degrees C is feasible. The receivers can be heated using a high intensity electric current flowing through the internal, tube. Uniform Joule heating results a reliable heat losses measurement method at temperatures up to 650 degrees C. (C) 2016 Elsevier Ltd. All rights reserved.
Keywords:Parabolic trough solar receiver;Measurement test bench;Absorptance and transmittance;Heat losses