This article characterizes a novel twin screw extrusion (TSE) process with the capability of rotating at speeds up to 4500 rpm. The resulting extreme high shear rate is expected to result in molecular weight changes due to thermomechanical degradation of the polymeric materials being extruded, polystyrene (PS) in this case. In order to differentiate between mechanical and thermal factors affecting degradation of PS running at ultrahigh speeds and also to evaluate the relative importance of the two mechanisms, PS has been extruded at different screw speeds and different barrel temperatures with corresponding melt temperatures. Viscosity measurements and size exclusion chromatography measurements show the extent of degradation due to mechanical stress as a result of high screw rotational speeds. Furthermore, through analyzing the kinetics of PS depolymerization, the reaction rate and hypothetical apparent temperatures at each screw speed have been calculated. All results support the idea that the mechanical shear stress can be considered as the controlling factor of polymer degradation in ultrahigh speed TSE. POLYM. ENG. SCI., 56:743-751, 2016. (c) 2016 Society of Plastics Engineers