High CO-tolerance and durability of anodic fuel cell electrocatalysts is one of the important factors for commercialization of direct methanol fuel cells (DMFCs). In this study, we describe the preparation of an electrocatalyst composed of poly[2,2'-(2,6-pyridine)-5,5'-bibenzimidazole] (PyPBI) and poly(vinylphosphonic acid) (PVPA) coated multi-walled carbon nanotubes (MWNTs) on which similar to 3 nm Pt nanoparticles (Pt-NPs) are deposited. The fabricated electrocatalyst shows 1.5-times higher CO tolerance compared to the commercial CB/Pt, which would be due to the wrapping of the CNTs with PVPA by the aid of PyPBI. Meanwhile, the electrocatalyst almost maintains its initial electrochemical surface area (ECSA) and mass activity of the methanol oxidation reaction (MOR) after 10,000 potential cycling in the range of 1-1.5 V vs. RHE. In contrast, the commercial CB/Pt shows almost a 50% loss in its ECSA and mass activity. These results indicate that the durability of the newly fabricated electrocatalyst is quite high and the obtained high CO-tolerance and durability are important for the design of an electrocatalyst for DMFC applications. (C) 2016 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.