Cu/SAPO-34 catalysts have been extensively investigated recently for NOx selective catalytic reduction (SCR) reactions. Due to the small pore size (4.3 angstrom) of the zeolites, it is a natural concern that the reaction rates might be dictated by the pore diffusion regime rather than the intrinsic kinetics. In this work, a series of Cu/SAPO-34 catalysts, with identical Cu ion active site loadings but varying zeolite particle sizes (1-9 mu m), were evaluated. A variety of characterization techniques (XRD, BET, H-2 TPR, and NH3 TPD) have confirmed that the same copper species and surface chemistry existed in these samples despite the different SAPO-34 particle sizes. While the Thiele modules governing the pore diffusion effects were vastly different, up to nine times, these samples shared a similar turnover frequency (TOF) and apparent activation energy (44.8 +/- 3.0 kJ/mol) for the NH3 SCR reaction. These results unequivocally conclude that under the representative SCR reaction conditions investigated in this work, the reaction rates on Cu/SAPO-34 powder catalysts are kinetically controlled and pore diffusion plays little role in disguising the intact intrinsic activity per single-site copper. (C) 2016 Elsevier Inc. All rights reserved.