Retro-reflective (RR) envelopes can reduce the urban heat island (UHI) effect. To develop a lower cost method for imparting RR properties to external wall surfaces, this research measures RR performance of RR surfaces made with glass beads. 8 glass bead RR samples were created, as well as 1 prism and 1 capsule type for comparison. Their angular retro-reflectance and angular distribution were measured by an emitting receiving optical fiber system developed in our laboratory. It shows that the retro-reflectance of all RR samples at low incident angle with respect to the perpendicular is better than at high angles. The RR capacity of glass bead samples with a refractive index of 1.9 is better than those of 1.5. The retro-reflectance of prism sample is much larger than the all glass bead samples at incident angles up to about 60-70 degrees. The performance decreased sharply at incident angles of 70 degrees and above. At high incident angles, the glass beads are slightly better than prisms. This could make them better suited to apply to outer walls with the goal of reducing reflection of midday sunlight onto streets and buildings. Also, considering their simple construction, glass beads may be more cost-effective the prism in reducing UHI. (C) 2016 Elsevier Ltd. All rights reserved.