Differences in internal resistances or operational conditions that affect the current between series connected MFC units are known to cause voltage reversal. In this work, we proved that voltage reversal does not happen when MFCs produce an identical maximum current (i.e., limiting current), even though their internal resistances may differ. Here, two MFCs having an internal resistance difference of 206 Omega produced an almost identical maximum current of 0.4 mA in non-stacked mode. When the MFCs were connected in series, there was no voltage reversal; the voltage at the maximum current of 0.37 mA ranged from 1 mV to 3 mV. This result clearly indicates that differences of internal resistances or operational conditions are not an essential prerequisite for occurrences of voltage reversal in stacked MFCs, and that the maximum current of MFCs may be a direct indicator for predicting voltage reversal occurrences prior to the series connection of MFCs. (C) 2016 Elsevier B.V. All rights reserved.