Hydrogen is a renewable and environmentally friendly fuel with high calorific value. Aluminum is a good option for working as hydrolyzing metal, and aluminum water reactions at medium high temperature serve as a good energy supply in the use of both hydrogen and released heat, which leads to high energy efficiency. This study focused on hydrogen production characteristics and the chemical kinetics of aluminum particles with the addition of magnesium and lithium below 1030 degrees C. The experiments were conducted with THERMO CAHN's Thermax500 pressurized thermogravimetric analyzer. The Al content was settled at 85%, and the Mg and Al contents were adjusted from 0% to 15%. The addition of Li and Mg into Al resulted in good hydrolysis performance, and the ratio of the reacted Al to the total Al was over 50% and even reached up to 89%. The reaction process showed an obvious three-stage feature, and the three stages primarily corresponded to the reactions of Li, Mg, and Al. The products of hydrolysis in our tests were LiAlO2, Li2Al4O7, Al2O3, and MgO. The different promotion mechanism of Li and Mg on the reaction of Al H2O resulted in a hydrolysis performance that did not change monotonously with Li content. (C) 2015 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.