The extraction of sulphuric acid from aqueous solutions and its recovery as ammonium sulphate using pseudo-emulsion based hollow fibre strip dispersion technique was investigated. The tertiary amine Alamine 308 was used as an extractant in most experiments. The effects on the permeation of various parameters such as the flow rates and the composition of the membrane, strippant and feed phases were studied. The analysis of sulphuric acid transport was made on the basis of the overall mass transfer coefficient of permeation, the values being found in the range of 3 x 10(-7)-5 x 10(-6) m/s. The mass transfer resistances were also examined, the relative contribution due to the transport in the membrane being found quite significant. (C) Elsevier B.V. All rights reserved.