The diffusioosmosis of an electrolyte solution inside a uniformly charged rectangular channel at steady locally developed conditions is the subject of this study. Utilizing a finite element based numerical procedure, we try to estimate the errors incurred by modeling the actual rectangular geometry of typical microchannels as a slit. We demonstrate that the flow pattern and direction are generally dependent upon the width-to-height ratio of the channel. Such a finding, besides showing the ineffectiveness of the slit geometry in representing a rectangular channel of small aspect ratio, informs us of another mechanism of controlling the diffusioosmotic flow. Inspections of the mean velocity reveal that, although it drastically grows by increasing the aspect ratio at smaller values of this parameter, no significant change is observed when the aspect ratio is 5 or higher. The same trend is observed when EDL is shrunk and is considered as a basis for the introduction of a slip-like velocity, similar to the concept of the Helmholtz-Smoluchowski electroosmotic velocity, which will be of high practical importance when dealing with a micronsized channel. Because of its significance, an expression is presented for this slip velocity utilizing the curve fitting of the results, assuming a typical Peclet number.