Journal of Electroanalytical Chemistry, Vol.716, 120-128, 2014
Electrochemical oxidation of isopropanol using a nickel foam electrode
In this study, a nickel foam electrode is used for the anodic conversion of isopropanol to acetone. The process is studied under well-defined experimental conditions including variation of the concentration of isopropanol, variation in the strength of the supporting electrolyte (aqueous KOH), different cyclic voltammetry scan rates, and different temperatures. The outcome of these experiments demonstrates that the isopropanol oxidation reaction is dependent on the presence of the beta-NiOOH surface species, which is generated at potentials near the potential of the isopropanol oxidation reaction. However, the two processes do not occur at the exact same potential and their respective behaviors under the various experimental conditions can be understood independently. Nickel foams are successfully applied as the anode material for controlled-potential electrolysis of isopropanol to form acetone. The Ni foam anode sustains a current density of 2.6 mA cm(-2) for the electrolysis time of 600 min without significant loss of activity. Isopropanol is converted to acetone at a rate of 5.6 mM per hour. (C) 2013 Elsevier B.V. All rights reserved.
Keywords:Nickel foams;Nickel oxyhydroxide electrocatalyst;Isopropanol oxidation;Organic electrochemistry;Electrochemical functional group interconversion