The corrosion properties of the nickel-aluminium bronze (NAB) in aqueous chloride media were investigated at different pHs by using linear potential sweep voltammetry and scanning electron microscopy. The NAB electrochemical behaviour was dependent on the solution pH, due to the different stabilities of the phases present within its microstructure. In particular, at solution pHs higher than 4.0 the NAB oxidation was driven by the dissolution of the copper-rich a-phase, whereas at pH values lower than 4.0 its anodic behaviour was controlled by the oxidation of the iron-, nickel- and aluminium-rich kappa(I)-, kappa(II)-, and kappa(IV)-phases. Furthermore, a kinetic model for the NAB oxidation, in neutral chloride solutions, was developed on the basis of the observed behaviour, i.e., order of reactions of NAB with respect to protons and chloride. Finally, considering the high affinity of benzotriazole for copper, the corrosion performance of NAB was studied in the presence of the inhibitor in neutral (pH of 6.2) and acidic (pH of 3.5) chloride solutions, where NAB exhibited different anodic behaviours. Crown Copyright (C) 2013 Published by Elsevier B.V. All rights reserved.