The authors present a directly photopatternable inorganic hardmask for 193 nm lithography based on the solution-deposited dielectric metal oxide sulfate (MSOx) system. To demonstrate pattern fidelity, 18 nm half-pitch features were written at a dose near 240 mu C/cm(2) (30 keV) with line width roughness values between 1.6 and 1.8 nm. Well-resolved and uniform 30 nm contact holes were fabricated via a litho-freeze-litho-etch process employing electron beam exposure and a simple thermal freeze. ZircSOx has a high index of refraction approaching 1.9 at 193 nm, and the extinction coefficient, k, can be varied by an order of magnitude by substituting Zr with Hf. Optical interference lithography at 193 nm was used to realize 60 nm half-pitch lines in MSOx at a dose of 25 mJ/cm(2). (C) 2010 American Vacuum Society. [DOI: 10.1116/1.3507889]