The purpose of this study was to evaluate the feasibility of using highly filled powders with 100 parts per weight of calcium carbonate and 10 parts per weight of polymer, acting as binder, as electrostatically applied paper coatings. Such powders prepared by different methods were evaluated as being suitable for electrostatic coating. Powders compacted at elevated temperatures demonstrated cohesion superior to that of calcium carbonate, and at best similar to that of aqueous coatings. Cohesion, porosity and thus absorption properties of compacted powders were affected by the powder preparation method, compaction process, and powder composition. Powders containing semicrystalline polymer turned out to be the most interesting for further testing. (C) 2015 Elsevier B.V. All rights reserved.