The electrochemical impedance spectroscopy, cyclic voltammetry, constant current charge/discharge and the constant power discharge methods have been applied to establish the electrochemical characteristics of the electrical double layer capacitor (EDLC) consisting of the 1-ethyl-3-methylimidazolium tetrafluoroborate (EMImBF(4)) ionic liquid and microporous carbon electrodes. Microporous carbon material used for preparation of electrodes (GDAC - glucose derived activated carbon), has been synthesised from D-(+)-glucose by the hydrothermal carbonization method, including subsequent pyrolysis, carbon dioxide activation and surface cleaning step with hydrogen. The Brunauer-Emmett-Teller specific surface area (S-BET = 1540 m(2) g(-1)), specific surface area calculated using the non local density functional theory in conjunction with stable adsorption integral equation using splines (SAIEUS) model S-SAIEUS = 1820 m(2) g(-1), micropore surface area (S-micro = 1535 m(2) g(-1)), total pore volume (V-tot = 0.695 cm(3) g(-1)) and the pore size distribution were obtained from the N-2 sorption data. The SBET, Smicro and V-tot values have been correlated with the electrochemical characteristics strongly dependent on the carbon activation conditions applied for EDLCs. Wide region of ideal polarizability (Delta V <= 3.2 V), very short charging/discharging time constant (2.7 s), and high specific series capacitance (158 F g(-1)) have been calculated for the optimized carbon material GDAC-10h (activation of GDAC with CO2 during 10 h) in EMImBE(4) demonstrating that this system can be used for completing the EDLC with high energyand power densities. (C) 2015 Elsevier B.V. All rights reserved.