Carbon coated LiNi0.5Mn1.5O4/C composite has been directly synthesized at 800 degrees C without using reducing gas or introducing additional low temperature treatments. Scanning/transmission electron microscope (S/TEM) observation shows clear coating layer on the particle's surface, which has been verified by Energy Dispersive X-Ray Spectroscopy (EDX), Raman spectra and Brunauer-Emmett-Teller (BET); and the results indicate the coating layer is amorphous carbon which significantly increases the BET surface area, and the carbon content is around 0.6 wt%. Unlike conventional low temperature coating process, the high temperature carbon coating process puts significant influence on the crystal structure in terms of degree of cation ordering and Mn3+ concentration. The LiNi0.5Mn1.5O4/C exhibits improved rate capability, smaller polarization and better cyclic performances at high rates. These improvements can be attributed to the conductive carbon layer with better chemical stability, as well as the smaller concentration of Mn3+ resulted from the high temperature coating process. (c) 2015 Elsevier B.V. All rights reserved.